1. Kraftwerk
  2. Information
  3. Service
  4. speedometer - Mopar
  5. Reading error codes

Reading Error Codes


Error tools can be read with OBD scantools and for some cars also by a special function through the instrument cluster display.

For this, proceed like this:

  1. unlock the car
  2. enter
  3. close the door
  4. insert key to ignition lock
  5. cycle the key like this: ON – ACC – ON – ACC – ON
  6. now the error codes are shown in the display
  7. if it shows ----- no error code is set.

Note: This procedure does not work for all cars, not all error codes are displayed with this procedure. Also not all error codes will be displayed with universal OBD scantools. The only way to get full access to all codes is to use original Chrysler scantools.